Friday, January 3, 2014

Waterjetting 17a - Runways and discriminatory cleaning

Welcome back as we begin a New Year, and I hope that it brings Prosperity and Happiness to you and yours and that it brings much success.

Somewhere within the celebrations of the last couple of weeks water has played a considerable role, probably largest in the many different ways in which it was used to clean items –either before or after use. Water, often with a bit of soap, has been one of the earliest cleansers helping to loosen and dislodge dirt as the flow passes over the surface. There have been studies in the past which suggest that there is little advantage to the use of antibacterial soaps over less expensive conventional soap. Although the initial study was in 2005 it has only been within the last week that the FDA has told manufacturers of antibacterial soaps and washes that they have to demonstrate that they are both safe and effective. They note:
In fact, there currently is no evidence that over-the-counter (OTC) antibacterial soap products are any more effective at preventing illness than washing with plain soap and water, says Colleen Rogers, Ph.D., a lead microbiologist at FDA. Moreover, antibacterial soap products contain chemical ingredients, such as triclosan and triclocarban, which may carry unnecessary risks given that their benefits are unproven.

"New data suggest that the risks associated with long-term, daily use of antibacterial soaps may outweigh the benefits," Rogers says. There are indications that certain ingredients in these soaps may contribute to bacterial resistance to antibiotics, and may have unanticipated hormonal effects that are of concern to FDA.

In light of these data, the agency issued a proposed rule on Dec. 16, 2013 that would require manufacturers to provide more substantial data to demonstrate the safety and effectiveness of antibacterial soaps. The proposed rule covers only those consumer antibacterial soaps and body washes that are used with water. It does not apply to hand sanitizers, hand wipes or antibacterial soaps that are used in health care settings such as hospitals.
The debate over the use of chemicals with water, rather than just relying on the mechanical force of the water to dislodge dirt (used generically to include bacteria and other undesired coatings) or the combination of water with a mechanical action (using a brush or rubbing hands together) has been evaluated in many circumstances, with different results. One path will form the thread for the next few posts, and it will take us to a perhaps unexpected product line. Given that this is the season when a lot of us travel, let's begin at an airport.


Figure 1. Plane landing at airport – note the puff of smoke from the tires (Seattle Times)

When a plane first makes contact with the end of a runway, as it comes in to land, the wheels are not rotating very fast on contact, and so there is a small smear of rubber left on the end of the runway as the tires are dragged up to the right speed by the movement of the aircraft over the tarmac. (A plane can lose a pound of rubber per tire on landing).

Over a period of time this thin layer of rubber starts to build up over the surface, covering and smoothing the rough asperities that allow subsequent tire impacts to grip the runway, and making the surface slick and less tractive as a way of slowing the aircraft. As a result planes can start to hydroplane in rainy conditions and several major accidents have been blamed on this layer being allowed to grow too thick and become a dangerous surface.

For many years the practice was therefore to bring out different chemical trucks to spray the surface and a recent operation in Port-au-Prince describes the operation.
The chemicals that the team used were environmentally safe and effective in cleaning rubber deposits from the surface. The chemicals were sprayed onto the airfield and then scrubbed, brushed and worked into the rubber deposits for approximately four hours. The chemicals loosened the sticky rubber buildup into a soft gel that was then removed from the runway with a brush and water onto the shoulders of the runway. . . . . .

The AOS Research Group has developed a C-130 deployable chemical rubber removal system that is light, compact and requires no in-theater support other than fuel and water. AFCESA provided $125,000 in Research and Development funds to evaluate the rubber removal system in actual expeditionary environment. Four team members (Figure 2) traveled to Haiti and used the rubber removal technology to remove rubber build-up from the runway. In three days (approximately three eight hour shifts) they cleared 125,000 square feet on the west end of the runway and 75,000 square feet on the east end.

Figure 2. Results from chemical removal of rubber at Port au Prince (ARA)

The process is relatively slow and somewhat manually intensive, which may be an advantage in a labor-rich environment such as Haiti, but which makes the process very expensive in places such as Europe and the United States. And this provided an opportunity for a new business. As I wrote first in “Waterjetting Technology”:
One of the fascinating stories of the waterjet cleaning industry is that of Bob White, and his wife Donna. In 1972 Mr. White was a small painting contractor who unsuccessfully tried to clean the rubber deposits left from the wheels of landing aircraft from the runway at McClellan Air Force Base in California (now closed). Although able to remove material at only 60 sq ft/hr, he was convinced, particularly after seeing that the state of the art system was a chemical treatment, that waterjetting was the answer. Through a combination of loans from a variety of sources to the tune of $180,000 he built a four-pump, 24 nozzle spray bar system, initially operating at 10,000 psi and went into business. By driving himself through the night and thus being able to underbid the competition he took the first 25 of 28 jobs which were bid, and by the end of that year he had paid off his loans. By 1977 he had 5 rigs on the road around the country and was anticipating his first million dollar year.


Figure 3. Bob White (From the Duck Book).

After the first year on the road it was found, for most applications, that the jets removed the rubber better at 5,000 to 6,000 psi rather than at 10.000 psi and there was the added risk that at the higher pressure the water would either damage or polish the underlying concrete, depending on its quality and that of the aggregate contained. By supplying the flow from each pump to a six nozzle section of the spray bar it was possible to isolate a section should it have a problem, while still operating the rest of the units.

Figure 4. Bob's early rig (ibid)

The rig used spray bars fitted with 36 nozzles of hardened steel, 0.062 inch orifice diameters with a 30 degree spread, required to give 1 inch of coverage at a 0.75 inch standoff used. Other available equipment used 2,750 hp pump units to supply 0.078 inch diameter jets held one-inch apart, and with up to 96 nozzles on the spray bar. Such a unit could clean paint build up over 0.18 inch thick at a rate of 13,000 sq ft/hr, at a cost of $0.064/sq ft. Lowering the nozzle diameter to 0.04 inches resulted in a bar 94 inches long which when held an inch and a half above the surface, at 7,000 psi would allow cleaning at the rate of 60 ft/min, for a combined rate of 40,000 – 50,000 sq. ft./hr. The cost was estimated at $0.037 to $0.05 per sq ft.

In 1974 White was winning contracts at $0.045 per sq ft, and going below $0.032 per sq ft to get others. He had at that time 34 competitors, and yet grossed $280,000 that year. In 1975 he was bidding runway cleaning at less than $0.022 per sq ft for larger areas. Nozzle life was on the order of 50 hours for the stainless steel tips, and 250 hours for the steel holders. In January of 1978 Bob White discovered he had cancer and although successfully treated by 1980 he had sold off his rigs to highway painting contractors while he himself had turned to publishing.
He was sadly reported as being murdered in Belize in 1988. He was a true Pioneer of the industry.

Runway cleaning has progressed considerably since those early days and modern systems use higher pressures, in part to reduce the amount of contaminated water that is produced, since the cost of collection and disposal becomes significant. There is also a marriage of chemical pre-treatment and waterblasting which is shown in a video here.

But the ability of the waterjet system to discriminately remove the overlying coating (rubber) without damage to the underlying surface led on to other applications, which I will cover in the next few posts.

82 comments:

  1. Replies
    1. PTJ is a factory dedicated to CNC precision machining, with its core competence (prompt and efficient response, high quality guarantee system, effective cost control capability ).
      When we provide the concrete product and processing services, we can also provide more closer customer-oriented technical services, quality control flow and efficient business management ability.
      With all these, we are able to bring more added value to our customers, so that our customers can focus on their own business and enhance their customer value.
      web:https://www.cncmachiningptj.com/Equipmentlist

      Delete
  2. This is a great post. It’s Very informative and well writing.

    baton rouge web design

    ReplyDelete
  3. A very interesting read and a great post alltogether. thanks for sharing this information.

    pressure washing wilmington nc

    ReplyDelete
  4. We added your article to our auto glass directory. You’ll find there is link to this blog.

    house painting Santa Monica

    ReplyDelete
  5. This is such a great resource that you are providing and you give it away for free.

    catheter supplies Chicago

    ReplyDelete
  6. Thank you for sharing this very informative post

    San Jose Airport Limo Service

    ReplyDelete
  7. hello,this post is really wonderful....it's really very intersting and informative....keep sharing....


    Accident lawyer Arizona

    ReplyDelete
  8. This is a great post. It’s Very informative and well writing

    Landscaping The Villages Florida

    ReplyDelete
  9. What a good blog you have here. Please update it more often. This topics is my interest. Thank you.

    Pressure Washing Raleigh

    ReplyDelete
  10. What a good blog you have here. Please update it more often. This topics is my interest. Thank you.

    Pressure Washing Raleigh

    ReplyDelete
  11. This is a great post. It’s Very informative and well writing.

    Furnace repair

    ReplyDelete
  12. This is a great post. It’s Very informative and well writing.

    windshield replacement Austin

    ReplyDelete
  13. This is a great post. It’s Very informative and well writing.

    catheter supplies Chicago

    ReplyDelete
  14. This is a great post. It’s Very informative and well writing.

    cleaning company Santa Barbara

    ReplyDelete
  15. Painting Contractors Everett

    Our company is based on the belief that our customers' needs are of the utmost importance. Our entire team is committed to meeting those needs. As a result, a high percentage of our business is from repeat customers and referrals.
    We would welcome the opportunity to earn your trust and deliver you the best service in the industry.

    Location:
    708-216TH ST SW
    BOTHELL, WA 98021
    Hours:
    Mon - Fri: 9AM - 5PM
    Sat: 10AM - 5PM
    Sun: Closed

    ReplyDelete
  16. This is a great post. It’s Very informative and well writing.
    Murder & Manslaughter

    ReplyDelete
  17. Great post, I really like the picture. The Van reminds me of my college roadtrip.


    Garage Door

    ReplyDelete
  18. What a good blog you have here. Please update it more often. This topics is my interest. Thank you.

    auto glass company Austin

    ReplyDelete
  19. Painting Contractors Marysville

    Seattle painting contractor. Interior and exterior house painting. Quality and precision painting service from RMD Painting.

    Contact us:

    Phone:(206) 920-9477
    website: http://rmdpainting.net

    Address:

    708-216TH ST SW
    BOTHELL, WA 98021
    Hours:
    Mon - Fri: 9AM - 5PM
    Sat: 10AM - 5PM
    Sun: Closed

    ReplyDelete
  20. This is a great post. It’s Very informative and well writing.

    Portland Family Law Lawyer

    ReplyDelete
  21. A very interesting read and a great post alltogether. thanks for sharing this information.

    San Jose Airport Limo Service

    ReplyDelete
  22. I would like to thank you for the efforts you have made in writing this article and i am hoping the same best work from you in the future as well.


    auto glass company Austin

    ReplyDelete
  23. "Very good post...well i think writing this kind of article is a tough job.Thanks for your blog.
    general contractor los angeles

    ReplyDelete
  24. Great post, I really like the picture. The Van reminds me of my college roadtrip.

    Portland Child Support Lawyer

    ReplyDelete
  25. Great post, I really like the picture. The Van reminds me of my college roadtrip.


    Same Day Dental Crowns Cincinnati


    ReplyDelete
  26. Thank you for sharing this very informative post

    Dental Bridge Long Beach

    ReplyDelete
  27. Thank you for sharing this very informative post
    Great post, this is informative and well made.


    Overhead Garage Door Round Rock

    ReplyDelete
  28. I think all of us know the Monster beats pro, it is very good with high performance, and the best quality.


    drain cleaning

    ReplyDelete
  29. Great and fantastic blog. I am interested very much in the subject matter of your blog, it’s my first visit.


    Zoom Whitening Scottsdale

    ReplyDelete
  30. Cool post! How much stuff did you have to look up in order to write this one? I can tell you put some work in.

    Truck accident lawyer Kansas City

    ReplyDelete
  31. Excellent article you have here. I just love to tinker with images. I am very thankful that I stumbled upon this site. Keep posting more articles like this.

    Car accident attorney

    ReplyDelete
  32. Nice post and very creative too.

    Zoom Whitening Scottsdale

    ReplyDelete
  33. Thanks for sharing this.
    OH! Great post..I was so impressed I've found this kind of blog..Thanks.
    Car accident attorney

    ReplyDelete
  34. Thank you for sharing this very informative post

    alternative cancer treatment

    ReplyDelete
  35. Great post. Keep up the good job.
    This is a great and informative site. Really well written and precise.
    ramp lifts Chicago

    ReplyDelete
  36. Thank you for sharing this very informative post

    Live cameras on site

    ReplyDelete
  37. hello,this post is really wonderful....it's really very intersting and informative....keep sharing....
    marriage counseling Cambridge

    ReplyDelete
  38. This is a great post. It’s Very informative and well writing.

    cleaning company Santa Barbara

    ReplyDelete
  39. Great van and article. Nice pictures too.

    Portland Divorce

    ReplyDelete
  40. A great blog and very helpfull post. I really like it.
    drain cleaning

    ReplyDelete
  41. This is a great post. It’s Very informative and well writing

    interior design foliage Burbank

    ReplyDelete
  42. "Very good post...well i think writing this kind of article is a tough job.Thanks for your blog.

    GenFX

    ReplyDelete
  43. "Very good post...well i think writing this kind of article is a tough job.Thanks for your blog.

    GenFX

    ReplyDelete
  44. This is a great post. It’s Very informative and well writing.

    cleaning service

    ReplyDelete
  45. This is a great post. It’s Very informative and well writing.

    moving cleaning

    ReplyDelete
  46. If you had some way of rating posts I would for sure give you a high rating my friend!

    truck signs National City

    ReplyDelete
  47. This is a great post. It’s Very informative and well writing.

    residential hard money loan Dallas

    ReplyDelete
  48. Great post, I really like the picture. The Van reminds me of my college roadtrip.

    rapid injection molding

    ReplyDelete
  49. Thank you for sharing this very informative post

    single hot rodders

    ReplyDelete
  50. This is a great post. It’s Very informative and well writing.

    termite control Oakland

    ReplyDelete
  51. A great tutorial and very helpful post. I really like it.

    commercial trucks

    ReplyDelete
  52. Just read your post and would like to thank you for maintaining such a cool blog.


    mobility scooter

    ReplyDelete
  53. Cool post! How much stuff did you have to look up in order to write this one? I can tell you put some work in.

    futures trading

    ReplyDelete
  54. Valuable information and excellent design you got here!

    cleaning company Studio City

    ReplyDelete
  55. This is a great post. It’s Very informative and well writing.

    Furnace repair

    ReplyDelete
  56. I found your blog when I was looking for a different sort of information but I was very happy and glad to read through your blog. The information available here is great.

    Overhead Garage Door Round Rock

    ReplyDelete
  57. If you had some way of rating posts I would for sure give you a high rating my friend!
    custom belt buckles

    ReplyDelete
  58. I would like to thank you for sharing your thoughts and time into the stuff you post!!

    Painless Dentist Cincinnati

    ReplyDelete
  59. This is a great post. It’s Very informative and well writing.

    residential hard money loan Dallas

    ReplyDelete
  60. A very interesting read and a great post alltogether. thanks for sharing this information.

    money lending Houston

    ReplyDelete
  61. Great Very valuable knowledge
    van and article. Nice pictures too.

    futures trading


    ReplyDelete
  62. You got a really useful blog I have been here reading for about an hour

    commercial trucks

    ReplyDelete
  63. I’m really impressed that threes so much about this subject that’s been uncovered and you did it so well, with so much class.

    Dental Crowns

    ReplyDelete
  64. Thanks for posting, definitely going to subscribe! See you on my reader.

    Truck Accident Lawyer

    ReplyDelete
  65. We added your article to our auto glass directory. You’ll find there is link to this blog.

    Truck Accident Lawyer

    ReplyDelete
  66. Great post, this is informative and well made.

    Massachusetts Workers Comp

    ReplyDelete
  67. This comment has been removed by the author.

    ReplyDelete
  68. A very interesting read and a great post alltogether. thanks for sharing this information.

    military pins


    ReplyDelete
  69. A fantastic read….very literate and informative. Many thanks
    bail agent Merced

    ReplyDelete
  70. This is a great post. It’s Very informative and well writing.

    earthquake retrofitting Hollywood

    ReplyDelete
  71. Well....I have no words for this awesome post!!!


    kk

    ReplyDelete
  72. This is a great and informative site. Really well written and precise.


    pressure washing wilmington nc

    ReplyDelete
  73. This is a great post. It’s Very informative and well writing.

    pressure cleaning wilmington nc

    ReplyDelete