Waterjetting 35b - Cutting the Missouri Stonehenge video

The video that I posted last time did not fare as well as had been hoped, in making the trip from my computer to the blogger post, and so this week, to see if there are other ways of peeling the apple, I have also posted a copy of the video to Youtube, to see if this works better.

The video is of the making of the Missouri Stonehenge for which, as I have mentioned in a previous post, we used a jet pressure of around 15,000 psi with a flow rate of 10 gpm.

The video makes the point that a high-pressure jet system can, with relatively little support, cut a straight edge down the side of a block, even if there is only a very thin layer of rock to remove. It is normally very difficult to do this with a conventional cutting saw, or similar tool, which requires more material on the free side to stop the blade from being deflected away from the cut line.

If this new posting works as I hope, then I will be posting a number of different videos that have been collected over the years, but on Youtube initially, though I will provide the link as I have above.